28mm Black Wadded Cap with Induction Heat Seal

£2.50£500.00

Our 28mm Black Wadded Cap with Induction Heat Seal is a great looking cap, ribbed around the perimeter to improve grip when unscrewing. There is a foam-backed heat induction foil inner seal that will provide a vigorous bond with HDPE containers. Induction Heat Seal (IHS) liners are an excellent choice to provide a tamper-evident air-tight and water-tight seal. These IHS caps are recommended for producing, manufacturing, packing, processing, preparing, treating, transporting, or storing food.

The heat generated should not harm the contents. However, as with all of our products, you should always test your products with our containers for compatibility.

This top can be used on all of our 28mm HDPE (ONLY) neck size bottles.

28mm Black IHS Cap

Our 28mm Black IHS Cap is supplied with the liner already inserted. A great looking cap which is ribbed around the perimeter to improve grip when unscrewing. This cap is compatible with HDPE bottles only.

After the bottle is capped, you will pass it under an induction coil (sealing head). When cooled, the polymer creates a bond with the bottle, resulting in a hermetically sealed product. Neither the container nor its contents should be negatively affected. The heat generated should not harm the contents. However, as with all of our products, you should always test your products with our containers for compatibility.

This top can be used on all of our 28mm HDPE (ONLY) neck size bottles.

Colour Black
Material Polypropylene (PP)
Fit Neck Size 28mm / 410
Dimensions 19mm x 31mmØ
Weight 3.8g
Product Code C28IHBK

The 28mm Black IHS Cap will fit these bottles…

200ml Natural HDPE Bottle
250ml Natural HDPE Bottle
500ml Natural HDPE Bottle
500ml Black HDPE Bottle
1 Litre Natural HDPE Bottle
1 Litre Black HDPE Bottle

Please note: Always test your product with the plastic Cap /Bottle for compatibility. We are happy to send a sample.

If you have never ordered plastic bottles, caps, jars, pots or accessories before and are unsure about which type you need, just give us a call on 01229 588877 or email our customer services at sales@the-pbc.com and we can advise you about the different products & plastics we stock.

PP

Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability. These caps are suitable for many products. Polypropylene closures with foamed (EPE) liners have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, household oils and solvents.

EPE liners are foam liners pre-inserted into the closure. Expanded polyethylene or EPE is made from LDPE resins. EPE foam has good thermal insulation properties and is also waterproof, thus it has a large number of packaging applications.

Induction sealing, otherwise known as cap sealing, is a non-contact method of heating an inner seal to hermetically seal the top of plastic and glass containers. A hermetic seal has the quality of being airtight and often means that it will be impervious to gases. This sealing process takes place after the container has been filled and capped. It is possible to overheat the foil causing damage to the induction heat seal layer. This could result in faulty seals, even weeks after the initial sealing process, so proper sizing of the induction sealing is vital to determine the exact system necessary to run a particular product. Sealing can be done with either a handheld unit or on a conveyor system.

Please encourage your end-user to recycle responsibly.

Weight 0.004 kg
Dimensions 3.1 x 3.1 x 1.9 cm
Quantity

25, 50, 100, 200, 500, 1000, 2000, 5000, 10000