50mm Wadded Cap With IHS Liner

£5.00£1,400.00

This 50mm Cap with IHS Liner is supplied with the liner already inserted. After the bottle is capped, it is passed under an induction coil (sealing head). When cooled, the polymer creates a bond with the bottle, resulting in a hermetically sealed product. Neither the container nor its contents should be negatively affected. The heat generated should not harm the contents. However, as with all of our products, you should always test your products with our containers for compatibility.

Minimum order quantity is 25. 
Please use the ‘Special Orders’ telephone number, or email us for any preferred quantity which is not listed.

50mm White Cap with IHS liner

This 50mm Cap with IHS Liner is supplied with the liner already inserted.

After the bottle is capped, it is passed under an induction coil (sealing head). When cooled, the polymer creates a bond with the bottle, resulting in a hermetically sealed product. Neither the container nor its contents should be negatively affected. The heat generated should not harm the contents. However, as with all of our products, you should always test your products with our containers for compatibility.

Colour White
Material Polypropylene
Fit Neck Size 50mm
Dimensions 26mm (H) x 46mm∅
Weight 13g
Product Code C50IHW

The 50mm Cap with IHS Liner fits

250 Aeropak bottle

Please note: Always test your product with the plastic Cap /Bottle for compatibility. We are happy to send a sample.

If you have never ordered plastic bottles, caps, jars, pots or accessories before and are unsure about which type you need, just give us a call on 01229 588877 or email our customer services at sales@the-pbc.com and we can advise you about the different products & plastics we stock.

PP

Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. These caps are suitable for many products. Polypropylene closures with foamed (EPE) liners have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, household oils and solvents.

EPE liners are foam liners pre-inserted into the closure. Expanded polyethylene or EPE is made from LDPE resins. EPE foam has good thermal insulation properties and is also waterproof, thus it has a large number of packaging applications.

Induction sealing, otherwise known as cap sealing, is a non-contact method of heating an inner seal to hermetically seal the top of plastic and glass containers. A hermetic seal has the quality of being airtight and often means that it will be impervious to gases. This sealing process takes place after the container has been filled and capped. It is possible to overheat the foil causing damage to the induction heat seal layer. This could result in faulty seals, even weeks after the initial sealing process, so proper sizing of the induction sealing is vital to determine the exact system necessary to run a particular product. Sealing can be done with either a hand held unit or on a conveyor system.

Please encourage your end-user to recycle responsibly.

Weight 0.013 kg
Dimensions 4.6 x 4.6 x 2.6 cm
Quantity

25, 50, 100, 200, 500, 1000, 2000, 5000, 10000